text.skipToContent text.skipToNavigation

Materials North America

Copper and Brass Sales

You have one or more items in your cart that are part of a promotion. Discounts have automatically been applied to your total.

Aluminum Alloy 2011 is an exceptional alloy that boasts remarkable strength and outstanding machinability. With its high tensile strength and an unbeatable strength-to-weight ratio, it offers the best of both worlds - durability and lightweight. Known for its versatility, 2011 Aluminum is used in a wide range of industrial settings, from transportation to the military and aerospace industries. It also offers excellent corrosion resistance, making it ideal for harsh environments, including marine and energy applications. 2011 Aluminum Alloy presents endless possibilities for creative designs while ensuring reliable performance across different sectors.

Characteristics

Good machinability, good mechanical properties, excellent free-cutting properties

Typical Uses

Screw machine products, tube fittings, pipe stems, atomizer and hose parts, connectors

Shop Aluminum 2011 Alloy

Get your quote within minutes by selecting your shape and dimensions below to search for available products. You can receive a discount by bundling and purchasing multiple products together.

Don’t see what you’re looking for? Request it now.

Product Properties

Chemical

This table contains the chemical composition limits of wrought aluminum alloys in percent by weight maximum unless shown as a range or minimum. Except for “aluminum” and “others, ” analysis normally is made for elements for which specific limits are shown. For purposes of determining conformance to these limits, an observed value or a calculated value obtained from analysis is rounded off to the nearest unit in the last right-hand place of figures used in expressing the specified limit, in accordance with ASTM Recommended Practice E29.

Cr
–
Cu
5.0 – 6.0
Fe
0.7
Mg
–
Mn
–
Si
0.4
Ti
–
Zn
0.3
Aluminum Min.⁽⁴⁾
Remainder
Others⁽¹⁾, Each⁽²⁾
0.05⁽⁶⁾
Others⁽¹⁾, Total⁽³⁾
0.15

(1) Includes listed elements for which no specific limit is shown.
(2) A .0008 weight percent maximum beryllium is applicable to any alloy to be used as welding electrode or welding rod.
(3) The sum of those “others” metallic elements 0.010 percent or more each, expressed to the second decimal before determining the sum.
(4) The aluminum content for unalloyed aluminum not made by a refining process is the difference between 100.00 percent and the sum of all other metallic elements present in amounts of 0.010 percent or more each, expressed to the second decimal before determining the sum.
(5) Beryllium 0.0008 maximum for welding electrode and welding rod only.
(6) Also contains 0.20 to 0.6 percent each of lead and bismuth.
(9) Boron 0.06 percent maximum.
(10) Also contains 0.40 to 0.7 percent each of lead and bismuth.
(12) Also contains 0.08 to 0.15 percent of zirconium.

Mechanical

The following typical properties are not guaranteed since in most cases they are averages for various sizes, product forms, and methods of manufacture and may not be exactly representative of any particular product or size. These data are intended only as a basis for comparing alloys and tempers and should not be specified as engineering requirements or used for design purposes. The indicated typical mechanical properties for all except 0 temper material are higher than the specified minimum properties. For 0 temper products, typical ultimate and yield values are slightly lower than specified (maximum) values.

Temper
T3
T8

(1) Based on 500,000,000 cycles of completely reversed stress using the R.R. Moore type of machine and specimen.
(2) Average of tension and compression moduli. Compression modulus is about 2% greater than tension modulus.

Physical

The following typical properties are not guaranteed since in most cases they are averages for various sizes, product forms, and methods of manufacture and may not be exactly representative of any particular product or size. These data are intended only as a basis for comparing alloys and tempers and should not be specified as engineering requirements or used for design purposes.

Treatable
Heat Treatable
Heat Treatable

Fabrication

Temper
T3
T4, T451
T8

  1. Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D, and E ratings generally should be protected at least on faying surfaces
  2. Stress corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test and are expressed as follows:
    • A = No known instance of failure in service or in laboratory tests.
    • B = No known instance of failure in service; limited failures in laboratory tests of short transverse specimens.
    • C = Service failures with sustained tension stress acting in short transverse direction relative to grain structure; limited failures in laboratory tests of long transverse specimens.
    • D = limited service failures with sustained longitudinal or long transverse stress.
  3. This rating may be different for material held at elevated temperature for long periods
  4. Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit.
  5. Ratings A through D for Weldability and Brazeability are relative ratings defined as follows:
    • A = Generally weldable by all commercial procedures and methods.
    • B = Weldable with special techniques or for specific applications which justify preliminary trials or testing to develop welding procedure and weld performance.
    • C = Limited Weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
    • D = No commonly used welding methods have been developed.

California Resident Notice: california proposition 65 warning

Need help finding what you're looking for?

Do you have a specific request or need a quote for something not listed on our website? Looking to learn more about a product or need help choosing the right material for your project? Our dedicated team is here to help.

Need immediate assistance?

Call us: +1 947-517-7575Chat live with a real person (no bots)

Please provide your first name

Please provide your last name.

Email address is not formatted properly. Please review and revise.

Please provide your email.

A valid phone number is required.

Please enter company name

Please provide your first name

Please provide your last name.

Email address is not formatted properly. Please review and revise.

Please provide your email.

A valid phone number is required.

Please enter company name

Please provide your zip code.

A valid US zip code is required. Please contact customer service if you are located outside the US.

Please include information about what you would like to have quoted.

Please include information about what you would like to have quoted. Please note: the special characters @ : < > do not work in this message form field.

Please provide your first name

Please provide your last name.

Email address is not formatted properly. Please review and revise.

Please provide your email.

A valid phone number is required.

Thank you for your message!

We will review your request and get back to you as soon as possible.

By submitting this form, you agree we may use your info to process your request and contact you. We respect your privacy.